Blog
Practical guides to valuing a company, preparing a sale or a fundraise, and building the financial models investment banks use.

Financial modelling6 min read
Acquisition Synergies: How to Value Them and Set the Price
Acquisition synergies are the gains that exist only if the two companies are combined. To decide how much to pay for them, you value each line, phase it over time, deduct integration costs and losses, then discount the whole lot.

Sales and fundraising7 min read
Acquisition Holding Company: Buy an SME With Debt
An acquisition holding company is a company set up to buy an SME: it borrows, pays the seller, then repays the loan with dividends from the company it bought. Here is how to build one and test that it holds, with a worked example.

Financial modelling7 min read
Business Plan for Valuation: Build a 5-Year DCF Forecast
In a DCF, the business plan weighs more than the discount rate. Here is how to build five years of cash flows from the drivers of the business, using a manufacturing SME valued at €9.8m.

Valuation7 min read
Pre-Revenue Startup Valuation: 3 Methods and an Example
With no revenue and no profit, a startup cannot be valued with an EBITDA multiple or a reliable DCF: you compare it with other young companies and score what reduces its risks. The Berkus method, the scorecard and funding-round comparables each produce a figure, and it is the cross-check between them that gives you a defensible range.

Financial modelling8 min read
Cap Table: Modelling Dilution Across Multiple Rounds
A cap table, or capitalisation table, records who owns what in a company, including the rights to future shares, and what each funding round changes. This guide shows how to build one in Excel across several rounds, with a worked example, the option pool, convertible instruments and the split of the exit price.

Valuation7 min read
Customer Concentration: Its Cost in a Business Valuation
A customer worth more than a quarter of your revenue is expensive when you sell: the buyer lowers the multiple, makes part of the price conditional, or strips the risk out of the valuation. Here are the figures on a worked example, and three ways to reduce that dependence before the sale.

Financial modelling8 min read
Cost of Debt: Calculation, Spread and After-Tax Rate
The cost of debt is the rate at which a company would borrow today, not the rate on its old contracts, and it enters the WACC after the tax deduction. Here are three methods to estimate it, a worked example and the mistakes that distort the discount rate.

Sales and fundraising7 min read
Financial Due Diligence: What Buyers Check in Your Accounts
Financial due diligence is the audit a buyer commissions on your accounts between the letter of intent and signing. Here are the five points it checks, the effect of each gap on the price using a worked SME example, and what you can prepare beforehand.

Financial modelling8 min read
Normalised Working Capital in a Financial Model: Days Method
Normalised working capital is the level of working capital a company needs in steady state, expressed in days of receivables, inventory and payables. This article shows how to calculate it on the right base, adjust it for year-end effects and project it in a financial model, with an example where the balance sheet understates the need by €1.4m.

Sales and fundraising7 min read
Shareholder Loan in a Business Sale: Effect on the Price
In a sale of shares, a shareholder loan is a debt the company owes to the seller: it is deducted from the value to set the price of the shares, then repaid separately. Here is how to treat it, using the worked example of an SME, and the mistakes that cost one side or the other money.

Financial modelling6 min read
Revolver LBO Model: Drawdowns and Repayments in Excel
The revolver in an LBO is a credit line that the company draws on when its cash falls below a minimum and repays as soon as it can. This article shows how to build it in Excel, with two formulas, a five-year worked example and the traps that distort the debt schedule.

Sales and fundraising6 min read
Vendor Loan: Funding the Purchase of an SME
A vendor loan lets the buyer pay part of the price later, and lets the seller complete a sale that the bank alone would not fund. Here is how to set the amount, rate and term, and what it really costs the seller, using a worked SME example.

Financial modelling7 min read
Value creation bridge in an LBO: splitting the return
A value creation bridge splits the gain on an LBO between growth, margin, multiple and deleveraging. Here is the calculation line by line on a buyout that turns €36.0m into €112.0m, with the cross term, fees, dividends and the Excel chart.

Sales and fundraising6 min read
Buying a Business: Setting the Price and Funding It
When buying a business, two prices matter: the one the market sets and the one the company can repay out of its own cash. Here is how to calculate both, then build the financing, using a worked example of a fictional SME.

Financial modelling7 min read
Sensitivity Table in Excel: Stress-Test a Financial Model
A sensitivity table in Excel recalculates a model's output for several values of one or two assumptions, without copying the model. Here is how to build it with the Data Table tool, check it and read it, using a DCF whose value ranges from €12.7m to €19.9m.

Valuation7 min read
How to Value a Loss-Making Company: 4 Methods
A company that loses money is not worth nothing: you value it on the profitability it can regain, minus what the road back costs. Here are four methods, applied step by step to a fictional small business with negative EBITDA.

Financial modelling7 min read
Control Premium: Calculation, Reference Price, Synergies
The control premium is the gap between the price an acquirer offers and the target's share price before the announcement. Its level depends on the reference price chosen, and it is only justified if the expected synergies cover it.

Sales and fundraising7 min read
Warranties and Indemnities: What a Seller Commits To
Warranties and indemnities oblige the seller of an SME to compensate the buyer if a debt or loss that arose before the sale comes to light afterwards. What it really costs you depends on four settings: the cap, the deductible, the duration and the security that backs it.

Financial modelling7 min read
DCF Model Review: 5 Checks Before You Trust the Value
A DCF model can show a value precise to the nearest thousand euros and still rest on a badly built cash flow. Here are the five checks to run before you believe the result, with an example where they take €3.1m off the equity value.

Valuation6 min read
Illiquidity Discount for a Private Company: What Rate?
The illiquidity discount reduces the value of a private SME because its shares are slow and difficult to resell, unlike a listed share. Its rate has to be justified point by point, applied to the right value and never added to a risk already counted elsewhere.

Financial modelling8 min read
Cost of Equity for a Private Company: Calculation
The cost of equity of a private company is calculated with the CAPM, using the beta of comparable listed companies, then adjusted with size and specific risk premiums. Here is each input, where it comes from and what it does to value.

Sales and fundraising7 min read
Letter of Intent in a Business Sale: What It Commits You To
The letter of intent sets out the price, how it is calculated and the conditions of a sale, then gives the buyer exclusivity to negotiate. Most of its clauses do not oblige you to sell, but exclusivity and confidentiality do bind you, and it frames the rest of the negotiation.

Financial modelling6 min read
Precedent Transactions: Finding Sale Multiples
The precedent transactions method values a company using the multiples paid when similar businesses were bought. The hard part is not the arithmetic: it is finding reliable prices and putting them on a common basis.

Valuation6 min read
Adjusted EBITDA: Correcting an SME's EBITDA Before a Sale
The EBITDA in your accounts is not the one a buyer will price: they correct it for everything that will not recur after the sale. Here are the usual adjustments, their effect on value and the ones the buyer will challenge.

Financial modelling7 min read
Three Financial Statements: Link Income, Cash and Balance
The income statement, the cash flow statement and the balance sheet form one system: every line of one reappears in another. Here are the links to build, a worked example that balances to the cent and the checks that prove your model holds.

Sales and fundraising6 min read
Earn-out: Paying Part of the Price Based on Results
An earn-out makes part of the sale price depend on future results, usually over one to three financial years. It bridges the gap between a seller who believes in growth and a buyer who wants to see it, provided the metric, the cap and the payment guarantees are drafted with care.

Financial modelling7 min read
Accretion Dilution: How to Read a Merger Model
An acquisition is accretive if it increases the buyer's earnings per share, and dilutive if it reduces it. The result depends mainly on two things: the price paid and how the deal is financed.

Valuation7 min read
Working Capital: How It Affects Your Business Valuation
Two SMEs with the same EBITDA are not necessarily worth the same price: the one that ties up more cash in stock and customer receivables is worth less. Here is how to calculate your working capital, put a figure on its effect on value and prepare it before a sale.

Financial modelling6 min read
Football Field Valuation: Presenting a Valuation Range
A football field chart summarises a valuation: one horizontal bar per method, running from the low value to the high value. Well built, it shows at a glance where the methods overlap and which range to adopt.

Sales and fundraisingupdated November 16, 20268 min read
Family Business Succession: What Value to Use?
Passing your company to a child or an employee is not priced like a sale to a trade buyer: the value either splits the estate fairly between heirs, or runs into what the successor can finance. Here is how to set the right figure in each case, with a worked example.

Financial modellingupdated November 13, 20268 min read
Trading Comparables: Peer Group, Multiples and Pitfalls
Trading comparables value a company from the multiples of listed companies that do the same business. The result depends mainly on two choices: which companies you keep, and how you calculate their multiples.

Valuation7 min read
Excess Cash in a Business Sale: How Much to Leave?
Before a sale, a well-run SME often holds more cash than it needs to operate. Here is how to calculate that excess cash, how it is added to the price of the shares and when it is better to pay it out before the sale.

Financial modelling6 min read
DCF Terminal Value: Gordon Growth or Exit Multiple
The terminal value in a DCF often makes up more than two thirds of enterprise value. Here are the two ways to calculate it, the Gordon growth model and the exit multiple, a worked example and the checks that keep it from being inflated.

Sales and fundraisingupdated November 9, 202610 min read
Pre-Money Valuation: How to Set the Price of a Fundraise
Pre-money valuation is the value placed on your company just before an investor comes in; add the amount raised and you get the post-money valuation, which fixes the stake sold. Here is how to calculate it, three ways to set it, and the clauses that, at the same valuation, change what founders really keep.

Financial modelling8 min read
LBO Model: Debt Tranches and Repayment Schedule
In an LBO model, debt decides the price you can pay, the return and the risk: tranches, rates, ranking, amortisation and cash sweep. Here is how to structure €100m of debt in three tranches, build the repayment schedule and test the covenants, with a full worked example.

Valuationupdated November 6, 20269 min read
Enterprise Value vs Equity Value: The Bridge Explained
Enterprise value measures what the business is worth; equity value measures what is left for the shareholders once net debt is deducted. Here is the formula that links the two, applied to an SME, and the list of items buyers add to net debt when they set the price.

Financial modelling7 min read
IRR Calculation: Formula, Excel and Worked Example
IRR calculation gives the annual return on an investment from its cash flows: the amount invested, dividends and the sale price. Here are the formula, the Excel function, a worked example and how to read the result alongside MOIC.

Sales and fundraising8 min read
How to Sell a Business: Steps and Timeline for an SME
How to sell a business: prepare it one to two years before the sale, then allow six to twelve months to run the sale itself, from finding buyers to signing. Here are the steps in order, what each one demands and the mistakes that cost a seller the most.

Financial modelling7 min read
Paper LBO Step by Step, with a Worked Example
A paper LBO estimates the return on a leveraged buyout in a few minutes on a sheet of paper: entry price, debt, repayment, exit price, then IRR and multiple. Here is the method in six steps, a complete worked example and the shortcuts that save time in interviews.

Valuationupdated November 2, 20268 min read
EBITDA Multiple: How to Choose the Right One for Your Sector
You choose an EBITDA multiple by starting from listed companies and comparable sales in your industry, then adjusting it for the size and risks of your SME. Here is where to find the figures, how to make the adjustments and the mistakes that skew the result.

Valuation6 min read
How to Value a Business: 4 Methods for an SME
To value a business, you cross-check two or three methods and keep the range where they overlap. Here are the four methods used for an SME, applied step by step to a worked example.

Financial modelling6 min read
WACC Calculation: Formula, Worked Example and Pitfalls
A WACC calculation weights the cost of equity and the after-tax cost of debt by the share each represents in the company's financing. Here is the formula, a complete worked example and the mistakes that most often distort a valuation.
What is the company worth? The answer in a minute, explained, with the report and the Excel model.
Value a company