Financial modellingupdated November 13, 20268 min read
Trading Comparables: Peer Group, Multiples and Pitfalls
Trading comparables value a company from the multiples of listed companies that do the same business. The result depends mainly on two choices: which companies you keep, and how you calculate their multiples.

What trading comparables measure
The trading comparables method (trading comps in investment banks) starts from a simple idea: two companies in the same business, with the same growth and the same profitability, should be worth the same number of times their earnings. So you look at what the stock market pays today for a group of listed companies close to the target, derive multiples from them, and apply those multiples to the target's figures.
The calculation is a single division; the work is in the four steps before it. This article follows them on a fictitious example, Novatherm, an unlisted manufacturer of industrial thermal equipment: expected 2026 revenue of €180m, EBITDA of €24m (operating profit before depreciation and amortisation), EBIT of €17m (operating profit) and net debt of €40m.
Step 1: choose the companies in the peer group
A good peer group usually has between five and ten companies. Below that, one company carries too much weight; above it, you end up including companies that no longer do the same business. The criteria, in order of importance:
- The business. Same products or services, same customers, same business model. An equipment manufacturer and a maintenance provider in the same sector have neither the same margins nor the same investment needs.
- The geography. Same markets, same cycles.
- The size. A group ten times larger than the target commands a higher multiple.
- Growth and margin. In the same business, a company growing at 10% a year is worth more than one that is stagnating. Record both in the peer group: they will help you position the target.
Competitors' annual reports and IPO documents often name their own listed competitors, which makes a good starting point. Note every company you rule out and the reason: you will be asked.
Peer group analysis: data providers, free sources and tools
A peer group analysis sets the figures of comparable companies side by side: growth, margins, debt and, for valuation, their multiples. The same table does two jobs. It shows where the target stands against its competitors, and it supplies the multiples for the next steps. Its quality depends on the data, which come from three kinds of source:
| Source | What it provides | Limits |
|---|---|---|
| Annual reports and companies' investor relations pages | Revenue, EBITDA, net debt, share count, options, lease liabilities | Manual work; only published, and therefore past, figures |
| Public databases: annual financial reports in ESEF format of companies listed in the European Union, the EDGAR database of the US Securities and Exchange Commission (SEC) | Audited accounts in machine-readable form, free of charge | No forecasts; the adjustments remain your job |
| Paid data providers (financial terminals such as Bloomberg, S&P Capital IQ, FactSet or LSEG Workspace) | Daily share prices, analysts' consensus forecasts, ready-made multiples, screening by sector and size | Annual subscription that mainly pays off for banks, funds and advisory firms; each provider defines EBITDA and net debt in its own way |
Two rules apply whatever the source. First, forward multiples (NTM) require consensus forecasts: without access to them, work on the last twelve months (LTM) and say so. Second, do not take any ready-made multiple on trust. Recalculate each company's enterprise value and multiples yourself, with the same definitions as in steps 2 and 3; otherwise the peer group compares figures that do not measure the same thing.
As a tool, a well-built spreadsheet is enough: one row per company, the raw data with their source and date, the calculations in separate columns. The Excel model at the end of this article follows that structure.
Step 2: calculate each company's enterprise value
The multiple is calculated on enterprise value (EV), meaning the value of the business to all of its financiers, shareholders and lenders alike. It is compared with EBITDA or EBIT, which also belong to all financiers. Our article on enterprise value vs equity value explains this bridge in detail.
EV = diluted market capitalisation + net debt + minority interests − non-consolidated investments
Market capitalisation is calculated on the diluted number of shares, not the number of shares outstanding. In-the-money options and free shares (those whose exercise price is below the share price) will create new shares. The treasury stock method counts them like this:
| Company A | Value |
|---|---|
| Shares outstanding | 50 million |
| Share price | €20 |
| In-the-money options (exercise price €12) | 2 million |
| Option exercise proceeds: 2 × €12 | €24m |
| Shares bought back with those proceeds: 24 ÷ €20 | 1.2 million |
| Diluted shares: 50 + 2 − 1.2 | 50.8 million |
| Diluted market capitalisation: 50.8 × €20 | €1,016m |
Take net debt at the date of the latest published balance sheet, and check that it treats leases the same way EBITDA does. Since IFRS 16, European listed companies record their leases as debt and take the rent out of EBITDA. If you add lease liabilities to EV, use reported EBITDA; if you exclude them, remove the rent from EBITDA. Mixing the two inflates the multiple.
Step 3: put all the figures on the same period
A multiple compares today's value with earnings for a given period. Every multiple in the peer group must cover the same period: either the last twelve months published (LTM) or the current year expected by analysts (NTM or year N, consensus figures).
Companies whose financial year does not end on 31 December must be calendarised, that is, brought back to the calendar year. Company C has a 31 March year end. Its EBITDA for the year from April 2025 to March 2026 is €380m, and the year from April 2026 to March 2027 is expected to deliver €400m. Calendar year 2026 contains three months of the first financial year and nine months of the second:
Calendarised 2026 EBITDA = 3/12 × 380 + 9/12 × 400 = 95 + 300 = €395m
Also sort out the exceptional items. A disposal gain, a restructuring charge or an impairment will not recur: strip them out of each company's EBITDA and EBIT, just as you would for the target.
Step 4: calculate and read the multiples
Here is Novatherm's peer group, six fictitious companies, in millions of euros, with expected 2026 figures:
| Company | Market cap | Net debt | EV | Revenue | EBITDA | Margin | EV/Revenue | EV/EBITDA | EV/EBIT |
|---|---|---|---|---|---|---|---|---|---|
| A | 1,016 | 180 | 1,196 | 1,450 | 232 | 16.0% | 0.82x | 5.2x | 7.2x |
| B | 640 | 95 | 735 | 820 | 118 | 14.4% | 0.90x | 6.2x | 8.5x |
| C | 2,300 | 420 | 2,720 | 2,900 | 395 | 13.6% | 0.94x | 6.9x | 9.4x |
| D | 410 | 30 | 440 | 540 | 60 | 11.1% | 0.81x | 7.3x | 10.0x |
| E | 880 | 210 | 1,090 | 1,100 | 140 | 12.7% | 0.99x | 7.8x | 10.1x |
| F | 520 | 60 | 580 | 950 | 48 | 5.1% | 0.61x | 12.1x | 29.0x |
Company F stands out: its EBITDA margin has fallen to 5.1%, against 11% to 16% for the others, and its EBITDA multiple is double theirs. The market is not paying 12 times a normal EBITDA; it is paying for an expected recovery on depressed EBITDA. Its multiple says nothing about the price of a healthy company.
Median rather than mean. With F, the mean EV/EBITDA multiple rises to 7.6x while the median stays at 7.1x. Without F, the mean falls to 6.7x and the median to 6.9x. The median barely moves when you remove an extreme value; the mean moves a lot. Always present the median, and where you remove companies whose multiple makes no economic sense, say so explicitly rather than quietly deleting them from the table.
Quartiles for the range. On the five companies retained, the first quartile of EV/EBITDA is 6.2x, the median 6.9x and the third quartile 7.3x (Excel's QUARTILE.INC function). This range, more than the low or high value, is the basis you work from.
Applying the multiples to the target
Novatherm has an EBITDA margin of 13.3%, in the middle of the peer group, a smaller size than every listed company, and comparable growth. Nothing justifies placing it outside the interquartile range.
| EV/EBITDA multiple | EV (€24m × multiple) | Net debt | Equity value |
|---|---|---|---|
| 6.23x (1st quartile) | €149.5m | €40m | €109.5m |
| 6.89x (median) | €165.4m | €40m | €125.4m |
| 7.33x (3rd quartile) | €175.9m | €40m | €135.9m |
The other multiples serve as a cross-check. The median EV/EBIT (9.38x) applied to EBIT of €17m gives €159.5m; the median EV/Revenue (0.90x) applied to revenue of €180m gives €162.0m. The three methods land between €159m and €166m: the peer group is consistent. To set this range against those from a DCF, precedent transactions and an LBO, bring them together on a football field valuation chart.
Novatherm is not listed. Its shares cannot be sold in a click, and it is smaller than the companies in the peer group. Many practitioners therefore apply a discount to equity value, the level of which is debated case by case. Our guide to the EBITDA multiple by industry explains how to adjust a listed multiple for a smaller company.
The mistakes that distort trading comparables
- Dividing market capitalisation by EBITDA. Market capitalisation belongs to shareholders alone, EBITDA to all financiers. The resulting multiple depends on each company's debt, not on its business.
- Mixing periods. An LTM multiple and a forward multiple cannot be compared, any more than a year ending in March and a year ending in December without calendarisation.
- Keeping an outlier without saying so. A loss-making company, a company in recovery or one that is the target of a takeover bid (whose share price already includes a premium) distorts the mean.
- Choosing the peer group after seeing the multiples. Set the criteria first. Removing a company because you dislike its multiple amounts to choosing the result.
- Forgetting the date. A trading multiple changes every day with the share price. State the pricing date and refresh the peer group before any presentation.
Trading comparables do not replace a DCF: they tell you what the market pays today, not what the company is worth on its own cash flows. The two cross-check each other, and a DCF's exit multiple often comes from this very peer group, as the article on DCF terminal value shows.
Our trading comparables Excel model calculates diluted market capitalisation, enterprise value, the EV/Revenue, EV/EBITDA and EV/EBIT multiples, the median and quartiles of the peer group, then the target's valuation range. It is a calculation tool: the result remains an estimate that depends on the peer group and your assumptions, and is neither a certified valuation nor investment advice.


