Bridgesheet

Valuation7 min read

Customer Concentration: Its Cost in a Business Valuation

A customer worth more than a quarter of your revenue is expensive when you sell: the buyer lowers the multiple, makes part of the price conditional, or strips the risk out of the valuation. Here are the figures on a worked example, and three ways to reduce that dependence before the sale.

An empty, open cardboard box standing on a wooden floor
Photo: Creativity103 · CC BY · Wikimedia

Customer concentration: the share of sales at which a buyer worries

Customer concentration is the share of your revenue that depends on a single customer, or on a handful of them. For you, that customer is a commercial success. For the buyer of your company, it is a risk: if the customer leaves after the sale, part of the profit the buyer based the price on disappears, and the loan taken out to pay you is still owed.

Buyers and their advisers use simple benchmarks, which vary by sector:

  • below 10% of revenue for the largest customer, the subject does not come up;
  • between 10% and 25%, the buyer asks about the contract and how long the relationship has lasted;
  • above 25%, concentration becomes a question of price;
  • when the top three customers exceed half of revenue, the buyer reasons as if the company had a single market.

Share of revenue does not tell the whole story. A customer that accounts for 35% of sales but 15% of margin, because it negotiates hard, weighs less than it seems. A 20% customer whose contract renews every year with no commitment weighs more. Concentration is therefore measured on three axes: share of revenue, share of margin and strength of the relationship.

What customer concentration costs in a valuation

The buyer has three ways of making the seller pay for this risk. They often combine them.

Mechanism How it works Effect for you
Discount on the multiple The EBITDA multiple applied falls by half a point to one and a half points against comparable companies A firm price cut that you cannot recover
Loss scenario The buyer calculates EBITDA without this customer, assigns it a probability and values the weighted average A lower price, but built on reasoning you can challenge figure by figure
Conditional price Part of the price is paid later, if the customer stays You receive less at signing and carry the risk for one to three years

The EBITDA multiple is the ratio between enterprise value and operating profit before depreciation and amortisation. Our article on the EBITDA multiple by industry explains how buyers set it, and why customer concentration is one of the three or four factors that move it.

A worked example: Vautrin Emballages

Take a fictional small company, Vautrin Emballages, a cardboard packaging maker producing made-to-measure boxes. Its owner is preparing a sale.

Item Amount
Revenue €6.0m
EBITDA €0.9m
Net debt €0.3m
Largest customer (a retail chain) €2.1m, or 35% of revenue
Top three customers 55% of revenue
Multiple on comparable sector transactions 6.0

Without concentration, the calculation would be simple: 0.9 × 6.0 = €5.4m of enterprise value, less €0.3m of net debt, giving €5.1m for the shares.

First approach: the discount on the multiple

The buyer lowers the multiple from 6.0 to 5.0 to account for the largest customer. Enterprise value: 0.9 × 5.0 = €4.5m. Price of the shares: 4.5 − 0.3 = €4.2m. Concentration costs €0.9m, or 18% of the price.

Second approach: the loss scenario

The buyer asks what EBITDA would become if the retail chain left. The customer generates a contribution margin (sales less variable costs) of 30%, or €0.63m (2.1 × 0.30). Vautrin could cut €0.18m of fixed costs within the year (a production team, a sales post). EBITDA would fall to 0.9 − 0.63 + 0.18 = €0.45m, half of today's level.

The buyer puts the probability of losing this customer within three years at 25%. Expected EBITDA: 0.75 × 0.9 + 0.25 × 0.45 = 0.675 + 0.1125 = €0.79m. Enterprise value: 0.79 × 6.0 = €4.7m. Price of the shares: €4.4m.

This approach gives you leverage in the negotiation. If you show that the contract still has three years to run, the probability falls. If the customer yields only a 20% contribution margin, losing it costs €0.42m rather than €0.63m, and EBITDA without it rises to €0.66m.

Third approach: the conditional price

The buyer offers €4.2m firm at signing, plus an extra €0.6m if revenue with the retail chain stays at or above €1.8m in each of the next two financial years. Maximum price: €4.8m. This extra payment is an earn-out; our article on the earn-out sets out what to write into it so that you do not lose it on a detail of the calculation.

Approach Price of the shares Gap against €5.1m
No concentration €5.1m
Discount on the multiple (5.0 instead of 6.0) €4.2m − €0.9m
Loss scenario (25% probability) €4.4m − €0.7m
Conditional price €4.2m firm + €0.6m − €0.3m if the customer stays

How the buyer measures concentration during due diligence

The buyer's advisory firm rebuilds revenue by customer over three financial years and asks five questions. Prepare the answers before it asks.

  1. The contract. Is there a written contract, for how long, with what notice period for termination, and does a change-of-control clause allow the customer to leave if the company is sold?
  2. Length and trend. For how many years has this customer been buying, and is its share rising or falling?
  3. The contacts. How many people, on your side and the customer's, carry the relationship? If you are the only contact of the purchasing director, the buyer sees two dependences in one.
  4. The margin. What margin does this customer generate compared with the others?
  5. Substitutability. Can the customer change supplier within three months, or do your tooling, references and lead times hold it?

These questions belong to the financial due diligence, in the chapter on the quality of revenue. A seller who arrives with a clear table by customer, the contracts and a margin analysis takes away the buyer's argument of uncertainty, which is the most expensive one.

Reducing customer concentration before you sell: three levers

Diversify, and measure what it takes

This is the soundest lever and the slowest. To bring the retail chain down to 25% of revenue without losing it, Vautrin must raise sales to €8.4m (2.1 ÷ 0.25), which is €2.4m more. In two years, that is out of reach for most small companies. The realistic target is often more modest: moving from 35% to 30% takes €1.0m of new sales, and already changes how the buyer reads the company. Start eighteen to thirty-six months before the sale, and look for customers in a different sector from your main customer, so that diversification also helps in a sector downturn.

Secure the customer you have

Turn an unwritten relationship into one the buyer can read: a framework agreement of two or three years with six months' notice, written pricing terms and an annual review calendar. Bring a second contact into the relationship, such as a sales director or a project manager, and step back gradually from day-to-day contact. Avoid exclusivity clauses that would stop you supplying its competitors: they strengthen the dependence instead of reducing it. A specialist lawyer will help you draft these contracts; the stakes go beyond the sale.

Present the risk yourself, with your own figures

A buyer who discovers the concentration in the data room (the secure folder of documents shared during due diligence) assumes the worst case. A buyer to whom you present EBITDA without the main customer, the plan to cut fixed costs and the margin analysis negotiates from your figures. If concentration is still high when you sell, accept carrying part of it through deferred consideration, but have it calculated on that specific customer's revenue, not on the overall profit that the buyer will control after the sale.

The mistakes that cost the most

  • Waiting for the sale to diversify. Two financial years of visible diversification in the accounts are worth more than announced projects.
  • Playing down the customer in the information memorandum. The due diligence firm rebuilds revenue by customer in two days; a gap with your presentation costs more than the concentration itself.
  • Signing a large exclusive contract just before the sale. It reassures on volume and worries on freedom.
  • Relying on verbal commitments. A buyer does not pay for a promise the customer has not signed.
  • Accepting an earn-out based on overall profit. The buyer decides the costs after the sale; base it on the revenue of the customer concerned.

To place your company before you start this work, Bridgesheet calculates a free valuation range from your public accounts, with a free account. The result is an estimate based on the figures available, which does not take your customer concentration into account: it is neither a certified valuation nor investment advice.