Bridgesheet

Sales and fundraising6 min read

Buying a Business: Setting the Price and Funding It

When buying a business, two prices matter: the one the market sets and the one the company can repay out of its own cash. Here is how to calculate both, then build the financing, using a worked example of a fictional SME.

Old metal key in the lock of a wooden door
Photo: Santeri Viinamäki · CC BY-SA 4.0 · Wikimedia Commons

Buying a Business: Two Prices to Work Out

Buying a business usually means borrowing money to purchase a company, then repaying that loan with the cash the company generates. The price the seller asks is therefore not enough to decide. You have to compare it with the price the company can carry once the acquisition debt is added. When that second price is lower than the first, the deal breaks in the first bad year.

To follow the calculation, take a fictional SME, Lemoine Heating, a heating installer. Its owner is retiring and a manager from the sector wants to buy it:

Item (2025 accounts) Amount
Revenue €3.2m
Reported EBITDA €0.48m
Net debt (financial debt less cash) €0.2m
Multiple asked by the seller 5.0

EBITDA is operating profit before depreciation and amortisation: it measures what the business generates before investment, tax and debt.

The Market Price: Start from Adjusted EBITDA

Never apply a multiple to reported EBITDA without correcting it first. The owner of Lemoine Heating pays himself a low salary, whereas a salaried manager would cost €0.08m a year more. For the buyer, the EBITDA that counts is therefore €0.40m. Our article on adjusted EBITDA explains these corrections in detail.

The asking price then works out like this:

Step Calculation Result
Enterprise value (value of the business, debt included) €0.40m × 5.0 €2.0m
Net debt to deduct −€0.2m
Price of the shares 2.0 − 0.2 €1.8m

The seller receives €1.8m, but you do not take over the shares alone: you also take over his €0.2m of debt.

The Total Funding Need Is Higher Than the Asking Price

The budget for buying a business covers everything you have to pay on the day you sign. In our example, the buyer prefers to refinance the existing debt so that everything sits in a single loan, and wants to keep a cash reserve.

Need Amount
Price of the shares €1.8m
Repayment of existing debt €0.2m
Costs (audit, lawyer, duties, bank) €0.08m
Cash safety buffer €0.12m
Total to fund €2.2m

When an owner leaves, a few relationships with customers or suppliers often weaken, and the first months reveal costs the audit missed.

The Affordable Price: What the Company Can Repay

The right question becomes: how much can the company repay each year? Start from adjusted EBITDA and take off what goes out before the bank can be paid.

Annual cash flow Amount
Adjusted EBITDA €0.40m
Corporate tax (approximately) −€0.07m
Ongoing capital expenditure −€0.06m
Increase in working capital −€0.02m
Cash flow available for debt €0.25m

Working capital is the money tied up between the invoices you have to pay and the invoices you are still waiting to collect. Tax is calculated here at 25% after €0.06m of depreciation and after interest, assuming that interest is deductible: have your accountant confirm this point, as it depends on the structure.

Banks look at the ratio between this cash flow and debt service, meaning the capital and interest due within the year. A cushion of 20 to 30% above 1 is a commonly quoted benchmark, not a rule: each bank has its own criteria. With a ratio of 1.25, the company can pay 0.25 ÷ 1.25 = €0.20m a year.

Over 7 years at 5.5%, a €1.0m loan costs €0.176m a year. The maximum debt therefore comes out at 0.20 ÷ 0.176 = €1.14m.

Suppose the buyer puts in €0.5m of personal savings. They can raise 1.14 + 0.5 = €1.64m, while they need €2.2m. They are €0.56m short. At the asking price, the purchase does not stand on the company's own cash flow.

Structuring the Deal: Equity, Bank Loan and Vendor Loan

The gap is rarely closed with a single lever. After negotiation, both sides settle on 4.5 times EBITDA instead of 5.0, which gives an enterprise value of €1.8m and €1.6m for the shares. The total need falls to €2.0m.

The financing is built in three pieces:

Source Amount Share Terms
Equity (buyer €0.5m, minority partner €0.2m) €0.7m 35% Repaid through dividends, no fixed date
Bank loan €1.0m 50% 7 years at 5.5%
Vendor loan €0.3m 15% Interest at 4%, capital repaid over 5 years after a 2-year grace period
Total €2.0m 100%

A vendor loan is the part of the price that the seller agrees to receive later: he becomes a lender to his own buyer. For the bank, this is a strong signal, because the seller stays exposed to the success of a company he knows better than anyone. The document that sets these terms deserves a close read: our article on the letter of intent explains what it commits you to.

In practice, the purchase often goes through a holding company set up by the buyer. It borrows, buys the shares, then repays the loan with the dividends paid by the acquired company. Your lawyer and your accountant will check that this structure suits your situation. Our article on the acquisition holding company walks through this structure with a worked example.

Stress-Testing the Deal Before You Sign

A deal is judged on its heaviest years, not the first. Here is the test, at constant EBITDA and then with EBITDA down 15%, at €0.34m:

Period Debt service Cash flow at €0.40m Ratio Cash flow at €0.34m Ratio
Years 1 and 2 €0.19m €0.25m 1.33 €0.21m 1.09
Years 3 to 7 €0.25m €0.25m 1.00 €0.20m 0.82

The vendor loan's grace period protects the first two years well. From year three, the ratio falls to 1.00: the debt gets paid, but with no cushion at all. If EBITDA falls by 15%, around €0.045m a year is missing. The €0.12m cash buffer and the €0.04m generated over the first two years cover a little over three years of shortfall.

The buyer must therefore grow EBITDA before year three, or negotiate a longer vendor loan from the start. Our article on the vendor loan explains how to set its rate, term and security.

When the Price Is Still Too High: Levers to Negotiate

If the numbers do not work, there are several levers, to be balanced according to the seller's priorities:

  • Lower the fixed price. The most direct lever, and often the hardest to obtain.
  • Lengthen or defer the vendor loan. The seller keeps his price, and you spread the burden.
  • Add deferred consideration. Part of the price is paid only if results follow: see our article on the earn-out.
  • Bring in a partner. A minority investor provides equity in exchange for a share of the capital.
  • Secure the loan. A public guarantee or an honour loan, depending on the schemes in your country, can help the bank say yes.

Mistakes to Avoid

  • Funding only the price of the shares. Costs, the debt you take over and the cash reserve all push the need up.
  • Building the plan on reported EBITDA. Without the owner's real salary, repayment capacity is overstated.
  • Counting on fast growth. The first year is for keeping customers and staff, not for breaking records.
  • Forgetting the end of the grace period. A vendor loan can make the debt heavier at the very moment cash gets tight.
  • Overlooking hidden risks. The audit must come before signing, and the warranties and indemnities protect the buyer against anything that surfaces from the past.

Looking at a French company? Company valuation gives you a first range from its public accounts, on screen and free with a free account. If the accounts are confidential, you can enter your own figures. This is an estimate: it is neither a certified valuation nor investment advice.